M-Tech Performance Motorcycles

Performance Projects

By M-Tech Motorcycles – Bend, Oregon

Kawasaki KLR650 685cc and 705cc Kits:

Kawasaki KLR with 685 KitM-Tech has completed our dyno testing with the Kawasaki KLR 685 kits. With the head porting, some jetting changes and only a slip-on muffler, we have gained 20% horsepower consistently.

All our testing has been done with premium pump fuel, stock air filter (airbox opened up) and stock cams.If you are having problems with your KLR burning oil, this kit is the fix. The bike runs smoother, faster, and more reliable.

Customer Testimonial: "By the way I’ve had the 705 kit in for 3000 miles and your work is flawless. Bike runs a lot, 1000% better, stronger and I’ve had zero issues with it. THANK YOU!" - M-Tech customer Jason Williams

Kawasaki KLR 685 Kit
Kawasaki KLR 685 Kit

 

FMF Q4 vs Leo Vince X-3!

Just tested back-to-back on our own 05 KLR650…We’ve been recommending the FMF Q4 exhaust to our KLR customers for a couple of years, but we recently got a chance to test the Leo Vince X-3 Enduro Slip-On. Our testing found that the X-3 matched the FMF Q4 on horsepower. However, the advantage went to Leo Vince for its noticeably quieter sound. Both systems, $325. Special pricing available with your KLR650 package from M-Tech.


M-Tech KLR650 705cc Kit

Fits: 1996-2010 KLR650
$499.00 Base Price (for Kit including all necessary gaskets)
Features:

  • 103.9mm - 705cc
  • Supplied with Piston, Pin, Rings, Circlips, Cylinder, Head Gasket, Base Gaskets, Exhaust Gasket, Cam Chain Tensioner Gasket & Instructions.
  • Dual Pin Oilers
  • DLC Coated Pin
  • 88 grams lighter than stock
  • 9.7 to 1 Compression
  • Valve relief to clear 40/36mm Valves
  • Std. Tension Oil Ring

+$175.00 required cylinder machining, boring & ring gapping
+$375.00 recommended Head Porting

HIGHLY RECOMMENDED! $1,090.00 Complete Package (+ shipping to/from Bend, OR)
Includes:

  • 705cc Kit
  • Head Porting
  • Cylinder boring & ring gapping
  • Jet Kit

M-Tech also Recommends the following to optimize power and performance:
$140.00 Oversize Valves, (4)
add + $100 Shop Labor to recut seats for oversized valves
$23.00 Valve Seals, (4)
$82.00 Valve Springs, OEM
$45.00 K&N Air Filter
$189 Hot Cam Intake
$209 Hot Cam Exhaust
EXHAUST SYSTEMS (All major brands available)
$299.95 & Up Slip-On Systems
$549.00 & Up Full Systems

Kawasaki KLR650 705cc Kit Horsepower Kawasaki KLR650 705cc Kit Torque

Before and after 705cc Kit comparison using the same KLR650 motorcycle. Before run the only modifications were jet kit, opened up air box and a Pro Circuit Slip-On Exhaust system. After run is the complete M-Tech 705cc Kit package as shown above.

Customer Testimonial: "In October 2011 I shipped my KLR650 engine to M-Tech for a full performance overhaul. Installed was a 705 kit, race camshafts and oversized valves. The engine builder also polished the head passages and jetted the carb for the new specs. One week later I embarked on a 8700 mile journey through the Southwest and up the California coast. The final leg of the three month journey was straight across the nation back home to Wisconsin. The whole time the engine performed flawlessly at all altitudes from 800 feet to 7600 feet with only minor idle speed adjustments. Today the bike turned a dyno roller to the tune of 47 rear wheel hp and 42 lb/ft torque. What is even more impressive is that the bike was tuned perfectly with no changes needed. After a winter of what would not be considered light riding, the engine was stronger than ever - all from the original base tune. That is how good the builder is at what he does. Also, KLR owners would be delighted to know that oil consumption was effectively eradicated. I measured no loss over the entire trip. Thanks you M-Tech for an outstanding job in service and product performance." - M-Tech customer Kyle Verwey


M-Tech KLR650 685cc Kit
Fits: 1996-2010 KLR650
$296.95 Base Price (for Kit including all necessary gaskets)
Features:

  • 102.5mm - 685cc
  • Supplied with rings, pin, circlips, base gasket spacer, base gasket, head gasket, cam chain tensioner gasket and exhaust gasket
  • Moly Coated Skirt
  • Dual Pin Oilers
  • 83 grams lighter than stock
  • 9.7 to 1 Compression
  • Valve relief to clear 40/36mm Valves
  • Std. Tension Oil Ring

+$95.00 required cylinder boring & ring gapping
+$375.00 recommended Head Porting

HIGHLY RECOMMENDED! $790.00 Complete Package (+ shipping to/from Bend, OR)
Includes:

  • 685cc Kit
  • Head Porting
  • Cylinder boring & ring gapping
  • Jet Kit

M-Tech also Recommends the following to optimize power and performance:
$140.00 Oversize Valves, (4)
add + $100 Shop Labor to recut seats for oversized valves
$23.00 Valve Seals, (4)
$82.00 Valve Springs, OEM
$45.00 K&N Air Filter
$189 Hot Cam Intake
$209 Hot Cam Exhaust
EXHAUST SYSTEMS (All major brands available)
$299.95 & Up Slip-On Systems
$549.00 & Up Full Systems

Click Here for Complete Shipping Instructions and Required Shipping Form:

For more information contact M-tech Motorcycles
Phone: 541-388-5005   Email:Info@MtechMotorcycles.com

M-Tech Motorcycles
20748 Carmen Loop #140
Bend, OR 97702

Race Tech
Superflow
Red Line
Mx-Tech
Eibach
Parts Unlimited
WPS

M-Tech Motorcycles
20748 Carmen Loop #140
Bend, OR 97702
Phone: 541-388-5005
Info@MtechMotorcycles.com

Home | Engine Performance | Dyno Mapping & Tuning | Suspension Performance | About Us | Contact Us | Racing | Tips | Links